Openssl Rsa Public And Private Key Generation Using Java

First of all, I'm confused why you are planning to use a Cipher to encrypt with a private key, rather than signing with a Signature.I'm not sure that all RSA Cipher providers will use the correct block type for setup, but it's worth a try. Setting that aside, though, I think that you are trying to load a non-standard OpenSSL-format key.

The openssl program provides a rich variety of commands, each of which often has a wealth of options and arguments. Many commands use an external configuration file for some or all of their arguments and have a -config option to specify that file. The environment variable OPENSSL_CONF can be used to specify the location of the configuration file. If the environment variable is not specified, a default file is created in the default certificate storage area called openssl.cnf. The settings in this default configuration file depend on the flags set when the version of OpenSSL being used was built.

  1. Generate a 2048 bit RSA Key. You can generate a public and private RSA key pair like this: openssl genrsa -des3 -out private.pem 2048. That generates a 2048-bit RSA key pair, encrypts them with a password you provide and writes them to a file. You need to next extract the public key file.
  2. How to generate random number by using dev urandom; How to generate RSA public and private keys(PEM format) with openssl? How to generate RSA public private keys(PEM format) with openssl? How to generate SHA256 digest? How to install KScope for code trace; How to know kernel memory usage in proc meminfo, proc slabinfo.

This article is an overview of the available tools provided by openssl. For all of the details on usage and implementation, you can find the manpages which are automatically generated from the source code at the official OpenSSL project home. Likewise, the source code itself may be found on the OpenSSL project home page, as well as on the OpenSSL Github. The main OpenSSL site also includes an overview of the command-line utilities, as well as links to all of their respective documentation.

  • 2Basic Tasks
    • 2.5Generating Keys Based on Elliptic Curves
      • 2.5.1Generating the Curve Parameters
  • 3Commands

The entry point for the OpenSSL library is the openssl binary, usually /usr/bin/openssl on Linux. The general syntax for calling openssl is as follows:

Alternatively, you can call openssl without arguments to enter the interactive mode prompt. You may then enter commands directly, exiting with either a quit command or by issuing a termination signal with either Ctrl+C or Ctrl+D. The following is a sample interactive session in which the user invokes the prime command twice before using the quit command to terminate the session.

This section is a brief tutorial on performing the most basic tasks using OpenSSL. For a detailed explanation of the rationale behind the syntax and semantics of the commands shown here, see the section on Commands.

Getting Help[edit]

As mentioned previously, the general syntax of a command is openssl command [ command_options ] [ command_arguments ]. The help command is no different, but it does have its idiosyncrasies. To view the top-level help menu, you can call openssl as follows.

This query will print all of the available commands, like so:

Note the above output was truncated, so only the first four lines of output are shown.

A help menu for each command may be requested in two different ways. First, the same command used above may be repeated, followed by the name of the command to print help for.

The program will then display the valid options for the given command.

Private

The second way of requesting the help menu for a particular command is by using the first option in the output shown above, namely openssl command -help. Both commands will yield the same output; the help menu displayed will be exactly the same.

For additional information on the usage of a particular command, the project manpages are a great source of information. Another excellent source of information is the project perldocs. perldoc is a utility included with most if not all Perl distributions, and it's capable of displaying documentation information in a variety of formats, one of which is as manpages. Not surprisingly, the project documentation is generated from the pod files located in the doc directory of the source code.

Getting Library Version Information[edit]

As mentioned above, the version command's help menu may be queried for additional options like so:

Using the -a option to show all version information yields the following output on my current machine:

Generating an RSA Private Key[edit]

Generating a private key can be done in a variety of different ways depending on the type of key, algorithm, bits, and other options your specific use case may require. In this example, we are generating a private key using RSA and a key size of 2048 bits.

To generate a password protected private key, the previous command may be slightly amended as follows:

The addition of the -aes256 option specifies the cipher to use to encrypt the private key file. For a list of available ciphers in the library, you can run the following command:

With your private key in hand, you can use the following command to see the key's details, such as its modulus and its constituent primes. Remember to change the name of the input file to the file name of your private key.

The above command yields the following output in my specific case. Your output will differ but should be structurally similar.

Openssl rsa public and private key generation using java server

Keep in mind the above key was generated solely for pedagogical purposes; never give anyone access to your private keys.

Generating a Public Key[edit]

Having previously generated your private key, you may generate the corresponding public key using the following command.

Bitvise ssh server generate key. Once connected, open Client key manager. Use the SSH Client to connect to the SSH Server using the account for which you want to configure the public key.

You may once again view the key details, using a slightly different command this time.

The output for the public key will be shorter, as it carries much less information, and it will look something like this.

For more information on generating keys, see the source code documentation, located in the doc/HOWTO/keys.txt file.

Generating Keys Based on Elliptic Curves[edit]

There are essentially two steps to generating a key:

  1. Generate the parameters for the specific curve you are using
  2. Use those parameters to generate the key

To see the list of curves instrinsically supported by openssl, you can use the -list_curves</t> option when calling the <tt>ecparam command.

For this example I will use the prime256v1 curve, which is an X9.62/SECG curve over a 256 bit prime field.

Generating the Curve Parameters[edit]

Having selected our curve, we now call ecparam to generate our parameters file.

Printing Parameters to Standard Out[edit]

You can print the generated curve parameters to the terminal output with the following command:

Printing Parameters as C Code[edit]

Analogously, you may also output the generated curve parameters as C code. The parameters can then be loaded by calling the get_ec_group_XXX() function. To print the C code to the current terminal's output, the following command may be used:

And here are the first few lines of the corresponding output:

Generating the Key[edit]

With the curve parameters in hand, we are now free to generate the key. Just as with the [#Generating an RSA Private Key RSA] example above, we may optionally specify a cipher algorithm with which to encrypt the private key. The call to generate the key using the elliptic curve parameters generated in the example above looks like this:

Putting it All Together[edit]

The process of generation a curve based on elliptic-curves can be streamlined by calling the genpkey command directly and specifying both the algorithm and the name of the curve to use for parameter generation. In it's simplest form, the command to generate a key based on the same curve as in the example above looks like this:

This command will result in the generated key being printed to the terminal's output.

Remember that you can specify a cipher algorithm to encrypt the key with, which something you may or may not want to do, depending on your specific use case. Here is a slightly more complete example showing a key generated with a password and written to a specific output file.

Just as with the previous example, you can use the pkey command to inspect your newly-generated key.

For more details on elliptic curve cryptography or key generation, check out the manpages.

Create a server certificate. Next, you'll create a server certificate using OpenSSL. Create the certificate's key. Use the following command to generate the key for the server certificate. Openssl ecparam -out fabrikam.key -name prime256v1 -genkey Create the CSR (Certificate Signing Request) The CSR is a public key that is given to a CA when requesting a certificate. The CA issues the certificate for this. Jun 09, 2019  To assign the existing private key to a new certificate, you must use the Microsoft Windows Server 2003 version of Certutil.exe. To do this, follow these steps: Log on to the computer that issued the certificate request by using an account that has administrative permissions. Click Start, click Run, type mmc, and then click OK. On the File menu, click. Microsoft

Base64 Encoding Strings[edit]

For simple string encoding, you can use 'here string' syntax with the base64 command as below. Intuitively, the -e flag specifies the action to be encoding.

Similarly, the base64 command's -d flag may be used to indicate decoding mode.

Generating a File Hash[edit]

One of the most basic uses of the dgst command (short for digest) is viewing the hash of a given file. To do this, simply invoke the command with the specified digest algorithm to use. For this example, I will be hashing an arbitrary file on my system using the MD5, SHA1, and SHA384 algorithms.

Openssl Rsa Public And Private Key Generation Using Java Server

For a list of the available digest algorithms, you can use the following command.

You can also use a similar command to see the available digest commands:

Below are three sample invocations of the md5, sha1, and sha384 digest commands using the same file as the dgst command invocation above.

File Encryption and Decryption[edit]

The following example demonstrates a simple file encryption and decryption using the enc command. The first argument is the cipher algorithm to use for encrypting the file. For this example I carefully selected the AES-256 algorithm in CBC Mode by looking up the available ciphers and picking out the first one I saw. To see the list of available ciphers, you can use the following command.

You can also use the following command:

Having selected an encryption algorithm, you must then specify whether the action you are taking is either encryption or decryption via the -e or -d flags, respectively. The -iter flag specifies the number of iterations on the password used for deriving the encryption key. A higher iteration count increases the time required to brute-force the resulting file. Using this option implies enabling use of the Password-Based Key Derivation Function 2, usually set using the -pbkdf2 flag. We then use the -salt flag to enable the use of a randomly generated salt in the key-derivation function.

Putting it all together, you can see the command to encrypt a file and the corresponding output below. Note that the passwords entered by the user are blank, just as they would usually be in a terminal session.

The analogous decryption command is as follows:

There are three different kinds of commands. These are standard commands, cipher commands, and digest commands. Calling the OpenSSL top-level help command with no arguments will result in openssl printing all available commands by group, sorted alphabetically.

Standard Commands[edit]

Overview of OpenSSL's command line utilities
Command Description
asn1parse Parse an ASN.1 sequence.
ca Certificate Authority (CA) Management.
ciphers Cipher Suite Description Determination.
cms CMS (Cryptographic Message Syntax) utility.
crl Certificate Revocation List (CRL) Management.
crl2pkcs7 CRL to PKCS#7 Conversion.
dgst Message Digest calculation. MAC calculations are superseded by mac(1).
dhparam Generation and Management of Diffie-Hellman Parameters. Superseded by genpkey(1) and pkeyparam(1).
dsa DSA Data Management.
dsaparam DSA Parameter Generation and Management. Superseded by genpkey(1) and pkeyparam(1).
ec EC (Elliptic curve) key processing.
ecparam EC parameter manipulation and generation.
enc Encoding with Ciphers.
engine Engine (loadable module) information and manipulation.
errstr Error Number to Error String Conversion.
gendsa Generation of DSA Private Key from Parameters. Superseded by genpkey(1) and pkey(1).
genpkey Generation of Private Key or Parameters.
genrsa Generation of RSA Private Key. Superseded by genpkey(1).
info Display diverse information built into the OpenSSL libraries.
kdf Key Derivation Functions.
mac Message Authentication Code Calculation.
nseq Create or examine a Netscape certificate sequence.
ocsp Online Certificate Status Protocol utility.
passwd Generation of hashed passwords.
pkcs12 PKCS#12 Data Management.
pkcs7 PKCS#7 Data Management.
pkcs8 PKCS#8 format private key conversion tool.
pkey Public and private key management.
pkeyparam Public key algorithm parameter management.
pkeyutl Public key algorithm cryptographic operation utility.
prime Compute prime numbers.
rand Generate pseudo-random bytes.
rehash Create symbolic links to certificate and CRL files named by the hash values.
req PKCS#10 X.509 Certificate Signing Request (CSR) Management.
rsa RSA key management.
rsautl RSA utility for signing, verification, encryption, and decryption. Superseded by pkeyutl(1).
s_client This implements a generic SSL/TLS client which can establish a transparent connection to a remote server speaking SSL/TLS.
s_server This implements a generic SSL/TLS server which accepts connections from remote clients speaking SSL/TLS.
s_time SSL Connection Timer.
sess_id SSL Session Data Management.
smime S/MIME mail processing.
speed Algorithm Speed Measurement.
spkac SPKAC printing and generating utility.
srp Maintain SRP password file.
storeutl Utility to list and display certificates, keys, CRLs, etc.
ts Time Stamping Authority tool (client/server).
verify X.509 Certificate Verification.
version OpenSSL Version Information.
x509 X.509 Certificate Data Management.

Openssl Rsa Public And Private Key Generation Using Java Windows 10

  • Paul Heinlein. 'OpenSSL Command-Line HOWTO'. Has many quick cookbook-style recipes for doing common tasks using the 'oppenssl' command-line application.
Retrieved from 'https://wiki.openssl.org/index.php?title=Command_Line_Utilities&oldid=2847'
java_rsa.java
packagetests;
importorg.apache.commons.codec.binary.Base64;
importjavax.crypto.Cipher;
importjava.nio.file.Files;
importjava.nio.file.Path;
importjava.nio.file.Paths;
importjava.security.KeyFactory;
importjava.security.PrivateKey;
importjava.security.PublicKey;
importjava.security.spec.PKCS8EncodedKeySpec;
importjava.security.spec.X509EncodedKeySpec;
publicclassTest {
/**
Generate key file using openssl
1、key pair
openssl genrsa -out private_key.pem 2048
2、public key
openssl rsa -in private_key.pem -pubout -outform DER -out tst_public.der
3、private key
openssl pkcs8 -topk8 -inform PEM -outform DER -in private_key.pem -out private_key.der -nocrypt
*/
publicstaticvoidmain(String[] args) throwsException {
String privateKeyFilePath ='/path/to/private/key/file';
Path privateKeyPath =Paths.get(privateKeyFilePath);
byte[] privateKeyBytes =Files.readAllBytes(privateKeyPath);
PrivateKey privateKey =KeyFactory.getInstance('RSA').generatePrivate(newPKCS8EncodedKeySpec(privateKeyBytes));
String publicKeyFilePath ='/path/to/public/key/file';
Path publicKeyPath =Paths.get(publicKeyFilePath);
byte[] publicKeyBytes =Files.readAllBytes(publicKeyPath);
PublicKey publicKey =KeyFactory.getInstance('RSA').generatePublic(newX509EncodedKeySpec(publicKeyBytes));
String str ='abcdefghijklmnopqrstuvwxyz1234567890';
Cipher cipher =Cipher.getInstance('RSA');
cipher.init(Cipher.ENCRYPT_MODE, privateKey);
byte[] encStr = cipher.doFinal(str.getBytes());
System.out.println(newString(Base64.encodeBase64(encStr)));
Cipher cipher1 =Cipher.getInstance('RSA');
cipher1.init(Cipher.DECRYPT_MODE, publicKey);
byte[] decStr = cipher1.doFinal(encStr);
System.out.println(newString(decStr));
}
}

Openssl Rsa Public And Private Key Generation Using Java Software

commented Dec 5, 2016

Openssl Rsa Public And Private Key Generation Using Java Download

Reference http://stackoverflow.com/questions/17513791/how-to-load-public-ssh-key-from-a-file-in-java

Openssl Rsa Public And Private Key Generation Using Java Download

Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment